Elbow Surge Arrester (6~15kV)

Applications：

suitable for American 200A electrical system, installed on the 200A interface of the high voltage outlet of American box substation, ring main cabinet, cable branch box, buried transformer and other electrical equipment to provide overvoltage protection for electrical equipment.

The product interface complies with the 200A casing design in the standard IEEE386.

Inquiry now

product introduction

Features：

The valve plate in the arrester built into the plug has good non-linearity, so that the arrester has low residual voltage, large flow capacity, fast response time, flat steep wave, and can effectively prevent lightning strikes, operation shocks and overvoltage protection, ensuring transmission and transformation Electric equipment is running.

Technical properties

Item	AH5WZ-10/27	AH5WS-10/30	AH5WS-13/36	AH5WZ-17/45	AH5WS-17/50
System Nominal Voltage(kV)	6	6	10	15	15
Rated Voltage	10	10	13	17	17
Continuous Operation Voltage (kV)	8.0	8.0	10.4	13.6	13.6
Nominal Discharge Current(kA)	5	5	5	5	5
Steep Current Impulse Residual Voltage (kV)	≤31.0	≤34.6	≤41.3	≤51.8	≤57.5
Lightning Impulse Residual Voltage(kV)	≤27.0	≤30.0	≤36.0	≤45.0	≤50.0
Switching Impulse Residual Voltage(kV)	≤23.0	≤25.6	≤30.7	≤35	≤42.5
Long Duration Current Impulse withstand(A)	150	75	150	150	100
High Current Impulse Withstand (kA)	65	65	65	65	65

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : Elbow Surge Arrester (6~15kV)

Tags :

Related products

Heat Shrinkable Cable Straight Termination Kit Cable Joint(8.7/15kV-26/35kV)

Straight Through Jointing Kit offered provide for suitable insulating and sealing performance and feature use of heat shrinkable and resin.

T rear with double protection surge arrestor (6~35kV)

Applications：

Provide lightning protection and over-voltage protection, can effectively ensure the safe operation of the power grid.

Low Voltage Cast Resin Straight Through Joint

COTRAN cast resin joint kits are reliable jointing solutions for intermediate connectors of wires and cables. The cast resins without filler are high quality, and fast setting resin for tough ambient conditions. Ideal for power cable accessories as insulation or as protective layer in case of MV joints. The products have the advantages of excellent waterproof performance, convenient installation, excellent electrical performance and long-term immersion in water.

Wraparound Repair Sleeve

Cotran wraparound repair sleeve (CWRS) is designed to repair damaged cable jackets and protect cable or pipes where needs corrosion protection on undamaged ones. CWRS is made from modified cross-linked polyolefin (XLPE) with a hot-melt adhesive. When heating, the sleeve shrinks and the adhesive melts, thereby achieving tightly bonding between the sleeve and the cable. It provides an excellent solution of protection against mechanical stress, harshest environments, moisture and corrosion.

CWRF is a fiber reinforced repair sleeve, which is composed of XLPE and fiber layer. It can provide better mechanical properties. CWRA is a fiber reinforced and aluminum layer reinforced repair sleeve, which is composed of XLPE, fiber layer, and aluminum layer. It can provide more stronger mechanical properties than CWRS and CWRF.