Product Features
- Room temperature curing, surface dry and full curing fast
- Good flame retardant, up to UL94V-0
- Moisture proof, shockproof, good insulation, and can withstand the impact of heat and cold
- can be used in the range of -60 ~ 200℃ for a long time
- Excellent ultraviolet light and weather resistance
Applications
- Curtain wall layer fireproof partition, smoke sealing;
- Wire, cable, cable bridge pipeline through the wall hole, fire prevention and smoke blocking.
Technical Parameters
No. |
Test Item |
Typical Value |
1 |
Surface dry time, min |
25 |
2 |
Hardness, HA |
40 |
3 |
Tensile strength, MPa |
2.3 |
4 |
Shear strength, MPa |
1.8 |
5 |
Elongation at break, % |
210 |
6 |
Breakdown strength, kV/mm |
21.5 |
7 |
UL- flame retardant grade |
V-0 |
Direction for Use
1. Use ethanol or acetone to wipe clean the dust and oil on the surface of the bonding parts. After the solvent evaporates, squeeze the glue out of the tube for construction.
2. Spread a small amount of fireproof glue evenly on the bonding surface; if it is to bond two substrates, after coating one surface with silica gel, the other substrate will be compounded together immediately,
applying a certain pressure, 20~35 ℃ , humidity ≥ 50 ﹪, it can be moved after being placed for 24 hours, it takes 1 week to fully cure, and the strength reaches the highest.
3. For thick layer sealing, the layer thickness should generally not exceed 3 mm; for coatings larger than 5 mm, scrape about 3 mm each time, and then continue the next construction after curing.
Product Specification
100g/ aluminum tube, 300mL/ barrel