PIB Self-Fusing Electrical Tape KC74

KC74 self amalgamating tape for insulating and moisture sealing of telecommunication cable connections For insulation and moisture sealing in splices and terminations of solid dielectric power cable up to 10kVFor general-purpose protection and waterproofingFor corrosion protection of metal pipework.

Inquiry now

product introduction

KC74 is a self-fusing, conformable, based on PIB (Polyisobutylene) rubber tape. It is a versatile material for waterproofing, corrosion protection, jointing and repair of cables, used indoors and outdoors through 10kV. Product properties and correct application ensure waterproof connections (for fresh and sea water) in a wide range of temperatures.

Technical Data

Property	Typical Value	Test Method
Tensile strength	1.86MPa	ASTM D 4325
Elongation at break	769%	ASTM D 4325
Dielectric strength	32.9KV/mm	ASTM D 4325
Dielectric constant	2.82	ASTM D 4325
Dissipation factor	0.0015	ASTM D 4325
Heat ageing (130°C 168H)	Pass	ASTM D 4388
Ozone ageing	Pass	ASTM D 4388
UV ageing	Pass	ASTM D 4388
Xenon ageing	Pass	ASTM D 4388
Water absorption	0.06%	ASTM D4325

Packing

Part No.	Dimension	Color	Rolls/Case
KC74	19mmx0.51mmx10m	Black	50

Note: Other size is available on request.

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : PIB Self-Fusing Electrical Tape KC74

Tags :

Related products

KC87 Waterproof Insulation Tape

Anticorrosive Coating for Towers

Anticorrosive coating for towers is a two-component, thick-type, one-side polyurethane acrylic coating with excellent weather resistance and long recoating performance. This product has both anti-corrosion, weather resistance in one, with excellent wear resistance, impact resistance, color retention and aging resistance.

Heat shrink cable accessories 10-36KV

Cotran heat shrink terminations (indoor/outdoor) are precisely designed to meet the parameters of international cable and cable accessories standards such as CENELEC HD 629.1 S1, IEEE-48, IEEE-404, IEC60502. Our heat shrink terminations offers reliable and consistent performance for longer service life. We have designed our heat shrink terminations for single core and 3 cores extruded UA, SWA/STA, CWS/CTW cable through 36KV.

Energy Storage System Cell Water Cooling Plate

◆High production efficiency

◆Large thermal transfer area

◆High performance cost ratio

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Good thermal exchange effect

◆Low leak risk andhigh reliability

Heat Shrinkable Busbar Insulation Tube

Designed for insulation of copper and aluminum busbars- for electrical substations and switchgear cabinets. Can be used for exterior installations

Shrink ratio: 2.5:1

Operating voltage: 35 kV

Material: polyolefin, halogen-free «HF»

Analogs: BPTM (Raychem); BBI (3M)

Resistant to the phenomenon of tracking and UV radiation

High dielectric strength

Color: brick red

The use of tubes ТТШ allows shortening the distance between phase busbars and significantly reducing the dimensions of the device

Protects electrical busbars against chemical corrosion

Protects equipment from short circuits in case of contact of electrical devices with animals and birds

Quick-Locking Hose Clamp en-CST

The Hose Clamp is used to mountequipmentto poles and tubes, compatible with slotted profiles and can be installed on cable ladders, brackets, I-beams and tubes.