Flexible Fireproof and Explosion-proof Blanket KC9001

KC9001 Flexible fireproof and explosion-proof blanket is suitable for the outer wrapping of the cable straight joint. It adopts multi-layer protective structure to cover the cable straight joint. The outer layer is made of ablation-resistant fireproof cloth with built-in flexible nano thermal insulation sheet and high strength aramid fiber cloth. When the fire broke out, the built-in can flexible nano can get insulation sheet is 3 ~ 4 times of that of the traditional performance, at the same time the highest heat resistance is above 1200 ℃, and it has excellent flame retardant and heat insulation effect, and the built-in high strength aramid fiber cloth can avoid the middle joint breakdown exploded the harm of adjacent cables, avoid the secondary damage caused by the fire. KC9001 light flexible fireproof blanket is easy to install, and it can be easily installed outside the cable intermediate connector after construction by means of pre-installed fire-resistant tie belt and D-type ring clasp without other tools.

Product Features

  • Small space after installation, can meet all kinds of applications
  • Fire insulation, high temperature resistance up to 1200℃ or more
  • Built-in flexible nano heat insulation sheet material, effectively improve the fire insulation performance
  • With its own strapping belt, easy installation, no need for other fixed tools
  • General specification, can be adapted to a variety of cable cross section of the intermediate joint
  • Halogen-free, non-toxic, safe and environmental protection


Applications

Fire proof and explosion-proof package at the middle joint of cable dense place and the corner of cable shaft wall.


Technical Parameters

No.

Test Item

Typical Value

Test Standards

1

Tensile strength

106Mpa

GB/T 528-2009

2

Tear strength

265kN/m

GB/T 529-2008

3

Dielectric strength

20.5kV/mm

GB/T 1408.1-2016

4

Volume resistivity

1.38*10^13Ω·cm

GB/T 1410-2006

5

Fire performance

At 750℃ for 90min, the whole process applied voltage 1U0, that is, 8.7kV

No breakdown

Refer to TICW 8-2012 for extruded insulated fireproof power cables with rated voltage from 6kV (UM =7.2kV) to 35kV (UM =40.5kV)

After the fire supply is stopped, continue to apply the voltage 1U0, that is, 8.7kV, 15min

No breakdown

After the end of the test, 3.5u0 was applied, i.e. 30.5kV, for 15min

No breakdown


Direction for Use

1.Unfold the flexible fireproof and explosion-proof blanket. Unfold the tie

2.Wrap the flexible flame-proof blanket at the middle joint of the cable from the end of the tie

3.Tie the belt to roll fastening, forming


Product Specification

Model

Specifications

Package

Width(m)

Length(m)

Area(m2)

KC9001-E

1.2

1.0

1.2

roll/box

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
Fireproof Tape
High Temperature Resistance Fireproof Tape KC70

◆ Can be used to splice and terminate cable, to avoid fire

◆ Physical and electrical properties are unaffected by the degree of stretch.

◆ Self-fusing tape.

◆ Heat resistance;

◆ Resistance to ozone, UV and xenon exposure;

◆ Operation and installation easily.

fire retardant blanket
Heat-absorbing and Fireproof Blanket KC9000
KC9000 heat-absorbing and fireproof blanket is a fireproof product that can be directly coated on the external protection of equipment, power cable, cable bridge, etc., which can effectively prevent flame spread and reduce the serious damage caused by high temperature conduction.
Composite Fireproof Board
Metal Composite Fireproof Board KC8000
KC8000 is a metal composite fireproof board with heated expansion property, it is composed of stainless steel plate, fire layer, wire mesh, aluminum foil, totally four layers of structure.
Non-solidified Fireproof Mastic
High Temperature Non-solidified Fireproof Mastic KC7000
  • Thermal expansion,
  • Elastic material, good plasticity, easy to install and operate
  • It can be used for repeated installation
  • Good adhesion to the substrate, outdoor long-term use of no vertical flow
  • Environment-friendly, halogen-free formula
  • Asbestos-free, non-toxic
  • No volatile organic matter
Moisture-controlling tablets
Anti-condensation Moisture-controlling Tablets KC4000
  • Excellent hygroscopic performance, hygroscopic capacity can reach more than 80% of its own weight, sustainable moisture absorption in high humidity environment.
  • Can be used for a long time, the effect of performance does not decay
  • With excellent softness, light weight, installation is not limited by the environment, easy to use
  • At the same time has the function of moisture absorption, moisture release, maintain stable humidity
  • It can also be used normally under zero temperature and does not harden
  • Non-toxic environmental protection, can be directly discarded as ordinary garbage
  • Non-corrosive, no corrosion when in contact with the equipment in the cabinet
  • Reusable。
Fire Retardant Tape
Fire Retardant Tape KC77

KC77 Fire Retardant Tape is a flexible tape with high expansion rate, fire prevention and heat insulation. It is mainly used for fireproof plugging of cracks around single or cluster cables, wind pipe, plastic pipe penetrations and metal penetrations. It has good water resistance, acid and alkali resistance, moisture and heat resistance, and freeze-thaw resistance. It is free of volatile organic matter, asbestos, fiber dust and other harmful substances, safety and environmental protection without pollution. It uses the combination of chemical expansion and physical expansion technology, rapid expansion in case of fire, with the rise of temperature formed with the strength of the carbonization layer tightly filled through the holes of the gap, block the spread of flame and smoke, with more than 3 hours of fire aging. At the same time, the product in the harsh, dirty and other outdoor environment, still can maintain the normal fire function.

Fireproof/Waterproof Sealant KC1002
Fireproof/Waterproof Sealant KC1002

KC1002 is a fireproof, waterproof sealant, specially designed for building and industrial fire sealing, excellent fire performance, has good weather resistance, high and low resistance and bonding

Moisture Proof Sealing Material KC3000
Moisture Proof Sealing Material KC3000

KC3000 Moisture proof sealing material is widely used for moisture proof sealing in distribution control cabinet, RMU, HV/LV switch cabinet, cable branch box, terminal box, pad-mounted transformer, mechanism operation box, assembly control unit, which has low viscosity, good fluidity and easy penetration, resistant to natural freeze-thaw cycle and all kinds harsh environment, while no deformation, no deterioration, no cracking.

With a variety of metal materials, cable sheath material can be closely bonded and not corroded, but also effectively prevent small animals from underground into the cabinet, reduce safety risks; to realize the closed cabinet moisture proof, prevent cable interlayer or channel from moisture, to provide reliable protection for production and operation equipment.

Subscribe
Subscribe to our newsletter and stay up to date with the latest news and deals !

click here to leave a message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact