KC80-S Cable Insulation Sealing Protective Pad

KC80-S cable insulation sealing protective pad is a self-adhesive sheet made of EPR rubber and butyl mastic, which has excellent weather resistance, wear resistance, insulation, waterproof and other properties. It is mainly used for the repair of cable outer sheath, the coating of power fittings, insulation protection and other scenarios. It provides excellent waterpoofing performance and temperature stability. Operating temperature rated to 90°C. Emergency overload rating to 130°C.

Inquiry now

product introduction

Product Features

Insulation protection , wear resistance and waterproof sealing
Weathering and corrosion resistance
Self-adhesive to form a reliable seal for long-term operation
Ozone resistant
UV resistant
Operating temperature: -20-40℃

Technical Properties

Property	Typical value	Test method
Thickness	Thickness：4.30mm EPR: 1.30mm; Mastic: 3.00mm	ASTM D 1000
Tensile strength	0.58MPa	ASTM D 412
Elongation at break	900%	ASTM D 412
Thermal aging test (110 ℃/168h)	Pass	IEC 60811
Tracking and erosion resistance	2.75kV, ≥1h，pass	IEC 60587 Test Method 2 Standard A
AC withstand voltage test	35kV, 60s，No breakdown	IEC 60060-1
AC withstand voltage test	25kV, 5min，No breakdown	IEC 60060-1
Volumetric resistivity	5.9×10¹⁵Ω.cm	IEC 60250
UV resistance	Pass	ASTM G 53
Heat Exposure (130°C, 1h)	Pass	ASTM D 4388

Specification

400mm x210mm, 140mm x210mm

*Other sizes and packing are available on requested.

Shelf life and Storage

KC80-S cable insulation sealing protective pad has 3 year's shelf life from date of manufacture when stored in a humidity controlled storage (0 °C to 30 °C and <75% relative humidity).

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : KC80-S Cable Insulation Sealing Protective Pad

Tags :

Related products

Self-adhesive Water Proofing Butyl Tape KC101

◆ High adhesion

◆ Weather resistance

◆ High flexibility

◆ High elongation at break

KC87 Waterproof Insulation Tape

Brazing Aluminum Cooling Plate for Electric Vehicle Power Battery

◆High production efficiency

◆Large thermal transfer area

◆Flexible flow channel design

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Good thermal exchange effect

◆Low leak risk and high reliability

4310 Straight Female Connector for 1-5/8 Flexible RF Cable

Material and Plating Inner Conductor Pin Brass / Silver Plating Inner Conductor Socket Tin Bronze / Silver Plating Insulator TPX Body & Outer Conductor Brass / Trimetal Plating Gasket Silicon Rubber Electrical Specifications Characteristics Impedance 50 Ohm Frequency Range DC~2.7GHz Insulation Resistance ≥5000MΩ Dielectric Withstanding Voltage 2500V rms Operating Voltage 1400V rms Center contact resistance ≤1.5 mΩ Outer contact resistance ≤1.5mΩ Insertion Loss @DC-2.7 GHz ≤0.10dB VSWR @0.8-1.0 GHz ≤1.08 @1.7-2.7 GHz ≤1.13 PIM3(2*43dBm) ≤-155dBc Environmental & Mechanical Specifications Durability (matings) ≥500 cycles Mechanical Shock Test Method MIL-STD-202, Method 213, Test Condition D Vibration Test Method MIL-STD-202, Meth. 204, Cond. A Temperature Range -65°C to +85°C RoHS Compliant Sealing Class IP68 24hr, 1m, 20℃ Regulatory Compliance / Certification ISO 9001:2015 Compliant The facts and figures contained herein are carefully complied to the best of our knowledge, but they are intended for general informational purposes only.

Heat Shrink Busbar Insulation Tape

Product Introduction

Made from radiation cross-linked polyolefin. The dual layer structure of insulation/hot melt adhesive effectively provides electric insulation and shock protection to busbar up to 24KV. Widely used to protect irregular shape busbar or connectors where tube products can not be applied.