Waterproof Insulation Waterseal Mastic Tape KC80

◆ Continuous waterproofing.
◆ Highly self-fusing tape.
◆ Suitable for irregular shapes cable.
◆ Resistance to high/low temperature.
◆ Resistance to corrosion.
◆ Resistance to ozone, UV, xenon exposure.
◆ New formulation for insulation.
◆ Operation and installation easily.
◆ Excellent adhesion to copper, aluminum and cable jacket.

Cotran Brand KC80 waterseal mastic tape is a conformable self-fusing rubber electrical insulating and sealing tape. KC80 consists of ethylene propylene rubber (EPR) and butyl mastic adhesive. It has strong adhesion to copper, aluminum, and cable jackets. It provides excellent waterproofing performance and temperature stability at 90℃,and withstanding of overload temperature up to 130℃. 

Insulation Mastic Tape


Applications

◆ Use for insulating, filling and moisture sealing in splices of all types of power cables and optical telecommunication cables. For primary insulation up to 1000 volts.
◆ Use for insulation and moisture sealing irregular shaped bus bar bolted connections
◆ Use for moisture sealing high or low voltage junction boxes and irregular splices.
◆ Moisture seal for power cable and wire connections
◆ Moisture seal for service drops
◆ Moisture seal for ground wire and rod connections


Test Parameters

No.

Test Item

Result

Test Method

1

Width

51mm

ASTM D4325

2

Thickness

1.65mm

ASTM D4325

3

Tensile Strength

1.29MPa

ASTM D4325

4

Elongation at Break

970%

ASTM D4325

5

Water absorption

0.16%

ASTM D570

6

DielectricStrength

26.5kV/mm

ASTM D1000

7

Volume resistivity

8.9x1015Ω.cm

ASTM D257

8

Adhesion (180° Steel plate)

78.4N/50mm

ASTM D1000

9

Heat exposure

Pass, 130°C

ASTM D4388

10

Ozone ageing

Pass

ASTM D4388

11

UV ageing

Pass

ASTM D4388

12

Xenon ageing

Pass

ASTM D4388


Installation

Cotran Brand KC80 waterseal mastic tape should be applied in half–lapped layers until desired insulation build up is reached.

Step 1 Wipe off the dusts on the splice area before wrapping.


 

Step 2 Remove the liner and stretch the tape to 1 to 2 times of its original length, apply the tape in 50%-lapped with mastic side toward area to the wrapped. Stretching the tape to 4 times of its original length is not recommended.


 

Step 3 Make sure there is 30mm to 50mm wrapping tape above both sides of the splice area.


 

Step 4 After KC80 waterseal mastic tape is applied, overwrapping COTRAN PVC insulation tape is recommended, apply 3 layers of COTRAN PVC insulation tape in a 50% overlapping with no tension. Make sure not to overstretch the PVC tape during installation.

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
3M mastic tape
Water Seal Mastic Self Adhesive Tape KC86

◆ Continuous waterproofing.

◆ Highly self-fusing tape.

◆ Suitable for irregular shapes cable.

◆ Resistance to high/low temperature.

◆ Resistance to corrosion.

◆ Resistance to ozone, UV, xenon exposure.

◆ New formulation for insulation.

◆ Operation and installation easily.

◆ Excellent adhesion to copper, aluminum and cable jacket.

Super Thin Mastic Tape
Super Thin Waterproof Waterseal Mastic Tape T28
◆ Continuous waterproofing;
◆ Ultra-thin;
◆ Good tensile strength;
◆ Highly self-fusing tape;
◆ Suitable for irregular shapes cable;
◆ Resistance to high/low temperature;
◆ Resistance to corrosion;
◆ Resistance to ozone, UV, xenon exposure;
Waterproof Insulation Tape
COTRAN 930 Waterproof Insulation Tape

COTRAN 930 is made of fully vulcanized rubber as the base material, supplemented by one tacky mastic layers of waterproof. It can meet the wear-resistant, waterproof and needs of sheath repair for all types of cables. COTRAN 930 is used in heat shrink and cold shrink field to provide good waterproof, insulation and sealing as the cable joints accessories.

Aluminum Water Cold Sheet
Aluminum Water Cold Sheet for Battery Energy Storage System

◆Excellent surface flatness

◆Large thermal transfer area

◆Flexible flow channel design

◆Easy processing and shaping

◆Good thermal dissipation effect

◆Low leakage risk and high safety

◆Good pressure resist and strength

◆High production efficiency and yield

Electrical Pvc Tape
Color Coding Electrical PVC Tape KC61

◆ High tensile strength.

◆ High elongation.

◆ Good insulation property.

◆ Excellent electrical properties.

◆ Good shape retention.

◆ Operation and installation easily.

◆ RoHS 2011/65/EU(2015/863/EU)compliant.



Heat Shrink Stress Control Tube
Heat Shrink Stress Control Tube (11~24kV)

Applications:

The specially designed chemical formulation and carefully controlled manufacture technology effectively release the high electrical stress present at insulation screen in termination and joint of power cables from 11kV to 24kV.

Aluminum Extruded Liquid Cooled tube
Aluminum Extruded Liquid Cooled tube for New Energy Vehicles

◆High processing efficiency

◆Lower energy consumption

◆Large thermal transfer area

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Excellent thermal performance

◆Low leak risk and high reliability

◆Good tightness and high strength

PVC Electrical Insulation Tape
Self Adhesive PVC Electrical Insulation Tape KC62

◆ High tensile strength.

◆ High elongation.

◆ Good insulation property.

◆ Excellent electrical properties.

◆ Good shape retention.

◆ Operation and installation easily.


Subscribe
Subscribe to our newsletter and stay up to date with the latest news and deals !

click here to leave a message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact