EPR High Voltage Insulation Tape KC71

◆ Can be used to repair XLPE cable terminations and joints or shielding for other devices up to 110kV.

◆ Retains its conductivity when stretched.

◆ Semi-conducting (low resistivity).

◆ Suitable for irregular shapes cable with good elongation.

◆ Withstand high temperatures (130°C/266°F) short-term overload.

◆ Compatible with all solid dielectric cable insulations and conductors.

◆ Resistance to ozone, solvents, UV, xenon exposure and moisture.

◆ Suitable for indoor or outdoor applications.

◆ Operation and installation easily.

◆ Increases its conductance and will not harm it in any way.

◆IPX8 class, stable and long-life during operation

◆Easy to install, only two steps (Cover, pull)

◆Fast installation, only 15-30 seconds needed to seal one connection

◆No limitation of spare space, especially design for MIMO &massive MIMO Antenna, also convenient to deploy on wall-mounted, high tower, pole-mounted condition etc.,

◆Easy to uninstall, only need knife to cut tube open

◆No skill required by engineers, uniform quality after installation, stable and good sealing and weatherproofing performance

◆Much time cost, and labor cost saving

◆Good operating capability under extreme cold and hot condition, highland, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone

Applications：

The electrically semi-conductive property of the breakout provides effective conductive screen and sealing protection to the cable terminations. The breakout can be used to cable terminations up to 36kV.

Material and Plating Inner Conductor Pin Brass / Silver Plating Inner Conductor Socket Tin Bronze / Silver Plating Insulator PTFE/TPX Body & Outer Conductor Brass / Trimetal Plating Gasket Silicon Rubber Electrical Specifications Characteristics Impedance 50 Ohm Frequency Range DC~7.5GHz Insulation Resistance ≥10000MΩ Dielectric Withstanding Voltage 4000V rms Operating Voltage 2700V rms Center contact resistance ≤0.4 mΩ Outer contact resistance ≤0.2 mΩ Insertion Loss @DC-2.7 GHz ≤0.10dB VSWR @0.8-1.0 GHz ≤1.08  @1.7-2.7 GHz ≤1.10 PIM3(2*43dBm) ≤-155dBc Environmental & Mechanical Specifications Durability (matings) ≥500 cycles Mechanical Shock Test Method MIL-STD-202, Method 213, Test Condition D Vibration Test Method MIL-STD-202, Meth. 204, Cond. A Temperature Range -65°C to +85°C RoHS Compliant Sealing Class IP68 24hr, 1m, 20℃ Regulatory Compliance / Certification ISO 9001:2015 Compliant The facts and figures contained herein are carefully complied to the best of our knowledge, but they are intended for general informational purposes only.

1. Through Type Feeder Clamps for coaxial, fiber optic, power, hybrid and aerial cables;
2. The clamp is designed to support cables with the dimensions of 1/4”, 1/2”, 7/8”, 5/4”, 13/8”, 1/2”s, etc;
3. Quick and easy to install and operate;
4. Without additional adapters, provide sturdy, reliable, long-term support;
5. Wind loaded, UV and corrosion resistant;
6. Capable to working in extreme temperature;

◆ High tensile strength and bonding strength.
◆ Suitable for irregular shapes cable with good elongation.
◆ Ensuring high quality seal over a wide range of temperatures.
◆ Physical and electrical properties are unaffected by the degree of stretch.
◆ Self-fusing tape.
◆ Good chemical resistance, weather resistance and corrosion resistance.
◆ Excellent ageing properties.
◆ Excellent electrical properties.
◆ Operation and installation easily.

◆Large thermal transfer area

◆Flexible flow channel design

◆Rapid thermal cooling speed

◆Excellent thermalcooling effect

◆Low leakage risk and high security

◆Stable and high production efficiency

◆Good pressure resistance and strength

◆Improve battery function andperformance