64/110KV YJZWGG Pre-Fabricated Dry Outdoor Termination For 64/110kv Xlpe Cable

Pre-fabricated dry termination is integrally composited of stress cone and silicone rubber insulation material.

Inquiry now

product introduction

Pre-fabricated dry termination is integrally composited of stress cone and silicone rubber insulation material. Stress cone is made of conductive silicon rubber, which is designed and computing optimized by finite element analysis software. It has reliably improved and balaced the electric field distribution at the cable shield fracture section.

Product characteristics
1.Injection-molded from high quality imported silicone rubber with high strength and elasticity and aging resistance, so it has good corrosion resistance, anti electrical erosion ability and hydrophobic property as well as excellent anti pollution flashover performance, still keeping good electrical properties under severely polluted condition.
2. Seamless manufacturing process, improves products mechanical and physical performance and electrical properties.
3. Light weight, about 1/8 - 1 / 1 0 weight of outdoor termination with porcelain insulator and less components, so it is easy to install.
4. Full silicone rubber dry type structure, no need for oil filled and gas, so it is no pollution to the environment.
5. Flexibility shakeproof, no fire and explosion risk and free maintenance for operating.
6. Unbreakable, so it is convenient for transportation and installation.
7. Flexible installation position and direction, so it can be installed on the pillar or overhead line tower vertically or inclinedly.
8. Each termination kit will be 100% inspected according to the standard in the factory.

Technical specification

Item	Parameter
Rated voltage U0/U	64/110kV
Highest operating voltage Um	126kV
Impulse voltage withstand level	550kV
Applicable ambient temperature	-40℃ to +60℃
Altitude	≤1000m
Operative standard	GB/T 11017.3 IEC60840

Item	Parameter
Termination body	integral pre-fabricated dry structure
Conductor connection mode	crimping
Creepage distance	≥4000mm
Position of installation	outdoor,vertical ±150
Tolerance contamination level	IV level
Suitable for cable section area	240mm² to 1600mm²

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : 64/110KV YJZWGG Pre-Fabricated Dry Outdoor Termination For 64/110kv Xlpe Cable

Tags :

Related products

64/110KV YJZGG Prefabricated Insulating Joint/ Straight Through Joint For 64/110kv Xlpe Cable

1. The body of joint is made of imported silicone rubber with good quality, so it is with high strength, elasticity and tear resistance as well as excellent thermal

aging resistance.

2. The body of joint has integral pre-fabricate structure with high voltage shielded, stress cone and insulating injection pressed integration, so it has excellent properties and easy to test as well as install.

3. The body of joint is analized and computed optimization by finite element software, so it has more resonable field-intensity distribution and high insulation safety margin.

4. The body of insulating joint and straight through joint is the same, the d ifference is just the handling of shielding on-site installation, insulating joint with one side insulated and the rest shielded while staight through joint full shielded.

5. The joint has completely sealed structure with high mechanical strength and good sealing performance.

6. Joint protecting is made of insulating copper case with high-intensitive T2 copper, and the moulded high-density PE material of its external surface is used for insulation and anti-corrosion with good mechanical protection and permanent waterproof sealing performance, which ensure the joint to run safely and reliably in the long-term under harsh environment.In addition, it can equip glass fiber reinforced plastic protective box as a strengthen waterproof measure accordingly.

7. Special installer tools make the installation more convenient.

Heat Shrinkable Busbar Insulation Tube

Designed for insulation of copper and aluminum busbars- for electrical substations and switchgear cabinets. Can be used for exterior installations

Shrink ratio: 2.5:1

Operating voltage: 35 kV

Material: polyolefin, halogen-free «HF»

Analogs: BPTM (Raychem); BBI (3M)

Resistant to the phenomenon of tracking and UV radiation

High dielectric strength

Color: brick red

The use of tubes ТТШ allows shortening the distance between phase busbars and significantly reducing the dimensions of the device

Protects electrical busbars against chemical corrosion

Protects equipment from short circuits in case of contact of electrical devices with animals and birds

Heat Shrinkable Cable Straight Termination Kit Cable Joint(8.7/15kV-26/35kV)

Straight Through Jointing Kit offered provide for suitable insulating and sealing performance and feature use of heat shrinkable and resin.

Heat shrink cable accessories 10-36KV

Cotran heat shrink terminations (indoor/outdoor) are precisely designed to meet the parameters of international cable and cable accessories standards such as CENELEC HD 629.1 S1, IEEE-48, IEEE-404, IEC60502. Our heat shrink terminations offers reliable and consistent performance for longer service life. We have designed our heat shrink terminations for single core and 3 cores extruded UA, SWA/STA, CWS/CTW cable through 36KV.

64/110kv YJZWY Outdoor Termina Tion With Porcelain Insula Tor For 64/110kv XLPE Cable

Termination with porcelain insulator is mainly comprised of porcelain sheath, stress cone, tail pipe, supporting insulator, lug and other accessories. Porcelain sheath has the structure of high strength electrical porcelain and rain-shed of different sizes. It is with good antipollution flashover performance and the porcelain sheath is filled with polyisobutene. This product has mature operational experience and reliable quality.

Heat shrink cable accessories 1KV

Cotran heat shrink terminations and joints are composed of a series of pre-expanded adhesive lined heat shrink tubes and necessary accessories. Heat shrink and provide excellent waterproof seal and electrical insulation. The terminations and joints are designed to be suitable for SWA/UA, XLPE/PVC/PILC, S/C, multi-core cable rated to 0.6/1kV.

64/110kv YJZWFY Outdoor Termination with Composite Insulator For 64/110kv Xlpe Cable

Composite sheath has many advantages compared with traditional porcelain sheath, so it is the best substitute and has been accepted gradually all over the world.

64/110KV YJZGG Dry Insulated Gis Termination For 64/110kv Xlpe Cable

Dry GIS termination has composite structure of stress cone and epoxy sheath, making the surface of pre-fabricated stress cone clinged to the inner wall of epoxy sheath through spring assembly to reach reasonable interface pressure.

Categories